600W Single Output Industrial FANLESS DC to DC Converter


600W Single Output Industrial FANLESS DC to DC Converter

Series Model No. Output Watts Input Voltage Input range Polarity Protection
12 STC-1260012M 600W ±12V DC ±9V ~ ±17V DC 12V (Max.50V DC)
24 STC-2460012M 600W ±24V DC ±18V ~ ±36V DC 24V (Max.50V DC)

* Any output voltage is available upon request

 
ENVIRONMENTAL CONDITIONS:
● Cooling: 600W Convection Cooling
● Operating Temperature: 0°C ~ +50°C Full Load
● Operating Humidity: 20%~85% RH. (Non condensing)
● Storage Temperature -20°C~+80°C
● Storage Humidity: 10%~90% RH. (Non condensing)
● Operating Altitude 10M Below Sea level and 3000M Above Sea level
 
DC INPUT CHARACTERISTICS:
● Input connector type 85A/600V 2-Pin M5 Nickel Plated Steel terminal
● Input Current  49A/90A (max) @ 12V Full Load High Line & Low Line
● Input Current  21A/43A (max) @ 24V Full Load High Line & Low Line
● Inrush Current Less than 10A Cold start @25°C ambient
 
 
DC OUTPUT CHARACTERISTICS:
Output Voltage Regulation Output Current Ripple & Noise
Load Line Cross 600W
Min. Max.
+12V ±5% ±1% ±5% 0A 50A 120mV
Total continuous output power 600 Watts

 
OVERALL PERFORMANCE:   
● Efficiency 65% typical @12V DC, 70% typical @24V DC
● Power Good Signal   TTL Compatible signal, on delay 100~500ms, off delay 1ms min
● Short Circuit Protection (SCP) All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP) Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP) +12V, +24V DC each unit output voltage
   
RELIABILITY:  
● MTBF (Mean Time Between Failure): >50 000 hours @max. Load, each input voltage & 25°C ambient
● Safety Standards Meet IEC 60950-1, EN 60950-1
● Safety Approved  
● EMI Compatibility (EMC) Standard EN 55032:2015/AC:2016, CISPR 32:2015, EN 6100-3-2:2014,
  EN 6100-3-3:2013, EN 55024:2010 +A1:2015
   
ISOLATION:
 
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand: INPUT to OUTPUT: 1500V DC for 60 seconds
● Dielectric Withstand: INPUT to FRAME GROUND: 1500V DC for 60 seconds
● Leakage Current: <0.0075μA @ 6V, 12V, 24V, 48V DC
   
Input & Output Connector specific:
● Connector type: 25A/300V UL Approved 8-Pin Terminal
   
Power chassis Dimension:   
● 295(L) x 170(W) x 100(H) mm
   
Net Weight:  
● 8 kg
   
Gross Weight:  
● 10 kg
   
Packing Detail  
● 1 pcs  
   
Measurement of Carton  
● 0.046 m3 / 1.65 Cuft

DOWNLOAD_specification_STC-XX60012M.pdf