4U ±48V DC 600W Single Output Industrial DC converter


4U ±48V DC 600W Single Output Industrial DC converter

Series Model No. Output Watts Input Voltage Input range Polarity Protection Output Voltage
48 STC-4860012 600W continuous ±48V DC ±37V ~ ±71V DC No +12V DC
48 STC-4860020 600W continuous ±48V DC ±37V ~ ±71V DC No +20V DC
 
 
ENVIRONMENTAL CONDITIONS:
● Cooling: Forced Air-cooling, 80x80x25 mm Fan x 1 (With Two Ball Bearing)
● Fan brand: DELTA, NMB, SUNON. Specifications are equivalent
● Operating Temperature: 0°C ~ +50°C (-20°C~+60°C H version is optional) Full Load
● Operating Humidity: 20%~85% RH. (Non condensing)
● Storage Temperature -20°C~+80°C
● Storage Humidity: 10%~90% RH. (Non condensing)
● Operating Altitude 10M Below Sea level and 3000M Above Sea level
 
DC INPUT CHARACTERISTICS:
● Input connector type 25A/300V UL Approved 3-Pin Terminal
● Input connector type Make sure to plug the power source according to the label instruction
● Input Current  9.6A / 19A (600W) @ Full Load High Line & Low Line
● Inrush Current, less than 90A (600W) Cold start @25°C ambient
 
 
DC OUTPUT CHARACTERISTICS:
Output Voltage Regulation status Output Current table Ripple & Noise
Load Line Cross 600W
Min. Max.
- ±5% ±1% ±5% - - 50mV
12V 0A 50A 120mV
20V 0A 30A 200mV

 
OVERALL PERFORMANCE:   
● Efficiency 80-85% @ 48V typical @ Full Load
● Short Circuit Protection (SCP) All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP) Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP)  
   
RELIABILITY:  
● MTBF (Mean Time Between Failure): >100 000 hours @max. Load, 25°C ambient
● Safety Standards Meet IEC 60950-1, EN 60950-1
● Safety Approved  
● EMI Compatibility (EMC) Standard EN 55032:2015/AC:2016, CISPR 32:2015, EN 6100-3-2:2014,
  EN 6100-3-3:2013, EN 55024:2010 +A1:2015
   
ISOLATION:
 
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand: 48V: INPUT to OUTPUT & INPUT to frame GND: 2.0kV DC for 60sec
● Leakage Current: <0.005μA @ 48V DC
   
Output Connector specific:  
● Terminal Block  
   
PCB specific:  
● 4 layer  
● Copper: 3 Oz each layer  
● Thickness: 1.6 mm  
● Material: FR4  
● PCB material origin: Taiwan  
   
Power chassis Dimension: 
● 184(L) x 150(W) x 86(H) mm / 7.24(L) x 5.9(W) x 3.37(H) Inches 
   
Net Weight:  
● 2.6 kg / 5.73 lbs
   
Gross Weight:  
● 3 kg / 6.61 lbs
   
Packing Detail  
● 8 pcs  
   
Measurement of Carton  
● 0.042 m3 / 1.49 Cuft

Input terminal picture for 184mm chassis length:
180mm_1_single_x400.jpg

DOWNLOAD_chassis drawing_STC-XX600XX_D2D-184-20200219
DOWNLOAD_specification_STC-48600XX.pdf
DOWNLOAD_chassis drawing_stc-d2d-184dd-20230906.pdf