4U ±12V DC Input 650W Single Output Industrial DC converter

Series	Model No.	Output Watts	Input Voltage	Input range	Polarity Protection	Output Voltage
12	STC-1240005	400W continuous	±12V DC	±9V ~ ±18V DC	No	+5V DC
12	STC-1255012	550W continuous	±12V DC	±9V ~ ±18V DC	No	+12V DC
12	STC-1265024	650W continuous	±12V DC	±9V ~ ±18V DC	No	+24V DC

Output Voltage: XX (X=0~9)


ENVIRONMENTAL CONDITIONS:
● Cooling: Forced Air-cooling,	80x80x25 mm Fan x 1 (with 2 Ball Bearings)
● Fan brand:	DELTA, NMB, SUNON. Specifications are equivalent
● Operating Temperature:	0°C ~ +50°C (-20°C~+60°C H version is optional) Full Load
● Operating Humidity:	20%~85% RH. (Non condensing)
● Storage Temperature	-20°C~+80°C
● Storage Humidity:	10%~90% RH. (Non condensing)
● Operating Altitude	10M Below Sea level and 3000M Above Sea level

DC INPUT CHARACTERISTICS:
● Input connector type	85A/600V 2-Pin M5 Nickel Plated steel Terminal
● Input connector type	Make sure to plug the power source according to the label instruction
● Input Current	28.8A / 57.7A (400W) 39.7A / 79.4A (550W) 46.9A / 93.8A (650W) @ Full Load High Line & Low Line
● Inrush Current, less than	100A (400W) 120A (550W) 150A (650W) @ Cold start @25°C ambient


DC OUTPUT CHARACTERISTICS:


OVERALL PERFORMANCE:
● Efficiency	70% @ 12V typical @ Full Load
● Short Circuit Protection (SCP)	All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP)	Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP)

RELIABILITY:
● MTBF (Mean Time Between Failure):	>100 000 hours @max. Load, 25°C ambient
● Safety Standards	Meet IEC 60950-1, EN 60950-1
● Safety Approved
● EMI Compatibility (EMC) Standard	EN 55032:2015/AC:2016, CISPR 32:2015, EN 6100-3-2:2014,
	EN 6100-3-3:2013, EN 55024:2010 +A1:2015

ISOLATION:
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand:	12V: INPUT to OUTPUT & INPUT to frame GND: 1.0kV DC for 60sec
● Leakage Current:	<0.005μA @ 12V DC

Output Connector specific:
● Terminal Block

PCB specific:
● 2 layer
● Copper: 3 Oz each layer
● Thickness: 1.6 mm
● Material: FR4
● PCB material origin: Taiwan

Power chassis Dimension:
● 140(L) x 150(W) x 86(H) mm / 5.51(L) x 5.9(W) x 3.37(H) Inches

Net Weight:
● 2.6 kg / 5.73 lbs

Gross Weight:
● 3 kg / 6.61 lbs

Packing Detail
● 8 pcs / GW 20.6 kg

Measurement of Carton
● 46 x 41 x 30 cm / 0.0566 m³ / 2 Cuft