1200W-2500W Single Output Industrial DC converter 170mm width


1200W-2500W Single Output Industrial DC converter 170mm width

Series Model No. Output Watts Input Voltage Input Voltage range Polarity reverse protection
12 STC-121200XX 1200W continuous ±12V DC ±9V ~ ±18V DC No
24 STC-241300XX 1300W continuous ±24V DC ±19V ~ ±36V DC No
48 STC-482200XX 2200W continuous ±48V DC ±37V ~ ±71V DC No
120 STC-1202500XX 2500W continuous ±120V DC ±90V ~ ±145V DC No

Output voltage: XX (X=0~9)

 
ENVIRONMENTAL CONDITIONS:
● Cooling: Forced Air-cooling, 80x80x25 mm Fan x 2
● Fan type: DC type, 2 x Ball Bearing, 6200 r.p.m., with Fan Control Card optional
● Fan Noise level tested: 75 dBa @ Distance 1m (SUNON Fan brand at 6200 r.p.m., 65.9-74 CFM) @ Full Load
● Operating Temperature: 0°C ~ +50°C Full Load
● Operating Humidity: 20%~85% RH. (Non condensing)
● Storage Temperature -20°C~+80°C
● Storage Humidity: 10%~90% RH. (Non condensing)
● Operating Altitude 10M Below Sea level and 3000M Above Sea level
 
DC INPUT CHARACTERISTICS:
● Input connector type 60A/600V UL Approved 4-Pin Terminal (GikoKa TB604)
● Input connection Make sure to plug the power source according to the label instruction
● Input Current  86A/173A @12V, 43A/82A @24V, 39.6A/69.5A @48V, 15A/24.4A @120V @Full Load High Line & Low Line
● Inrush Current Less than 200A @12V, 100A @24V, 75A @48V, 50A @120V @ Cold Start @25°C
 
 
DC OUTPUT CHARACTERISTICS:
Output Voltage Regulation status Output Current table Ripple & Noise
Load Line Cross 1200W 1300W 2200W 2500W
Min. Max. Min. Max. Min. Max. Min. Max.
12V ±5% ±1% ±5% 0A 100A 0A 108A 0A 183A 0A 208A 120mV
24V 0A 50A 0A 54A 0A 91.7A 0A 104A 240mV
48V 0A 25A 0A 27A 0A 45.8A 0A 52A 480mV
120V 0A 10A 0A 11A 0A 18.6A 0A 30A 1200mV

 
OVERALL PERFORMANCE:   
● Efficiency 70% typical @ 12V, DC Full Load @50°C~55°C
80% typical @ 24V, DC Full Load @50°C
83% typical @ 48V, DC Full Load @50°C~57°C
83% typical @ 59V, DC Full Load @50°C
90% typical @ 120V, DC Full Load @50°C~55°C
92% typical @ 138V, DC Full Load @50°C
● Short Circuit Protection (SCP) All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP) Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP)  
   
RELIABILITY:  
● MTBF (Mean Time Between Failure): >100 000 hours @max. Load, 25°C ambient
● Safety Standards Meet IEC 60950-1, EN 60950-1
● Safety Approved  
● EMI Compatibility (EMC) Standard EN 55032:2015/AC:2016, CISPR 32:2015, EN 6100-3-2:2014,
  EN 6100-3-3:2013, EN 55024:2010 +A1:2015
   
ISOLATION:
 
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand: 12V, 24V: INPUT to OUTPUT & INPUT to frame GND: 1.0kV DC for 60s
● Dielectric Withstand: 48V: INPUT to OUTPUT & INPUT to frame GND: 2.0kV DC for 60s
● Dielectric Withstand: 120V: INPUT to OUTPUT & INPUT to frame GND: 2.5kV DC for 60s
● Leakage Current: <0.005μA @ 12V, 24V, 48V, 120V DC
   
Output Connector specific:  
● Terminal Block
   
PCB specific:  
● 2 layer 1.6mm / STC-121200XX, STC-241300XX
● 4 layer 1.6mm / STC-482200XX, STC-1202500XX
● Copper: 3 Oz each layer  
● Material: FR4  
● PCB material origin: Taiwan  
   
Power chassis Dimension:   
● 388.5(L) x 170(W) x 100(H) mm / 15.295(L) x 6.69(W) x 3.937(H) Inches
   
Net Weight:  
● 5.2 kg / 11.46 lbs / STC-121200XX, STC-241300XX
● 5.6 kg / 12.34 lbs / STC-122200XX, STC-242500XX
   
Gross Weight:  
● 6.3 kg / 13.89 lbs / STC-121200XX, STC-241300XX
● 6.7 kg / 14.77 lbs / STC-122200XX, STC-242500XX
   
Packing Detail  
● 2 pcs
● 12.7 kg / 27.99 lbs
   
Measurement of Carton  
● 52 x 30 x 45 cm / 2.47 Cuft / 0.07 m3

DOWNLOAD_drawing_CHASSIS_T1200-388-170-100-20190125.pdf
DOWNLOAD_specification_STC-XX2500XX.pdf