4U 2200W-2500W Single Output Industrial DC to DC converter 170mm width

Series	Model No.	Output Watts	Input Voltage	Input range	Polarity Protection
12	STC-122200XX	2200W continuous	±12V DC	±9V ~ ±17V DC	No
24	STC-242400XX	2400W continuous	±24V DC	±18V ~ ±35V DC	No
48	STC-482500XX	2500W continuous	±48V DC	±36V ~ ±59V DC	No
120	STC-1202500XX	2500W continuous	±120V DC	±90V ~ ±145V DC	No

Output voltage: XX (X=0~9)

ENVIRONMENTAL CONDITIONS:
● Cooling: Forced Air-cooling,	80x80x25 mm Fan x 2 (With Two Ball Bearing)
● Fan brand:	DELTA, NMB, SUNON, SUNON IP68 (for H version). Specifications are equivalent
● Operating Temperature:	0°C ~ +50°C Full Load
● Operating Humidity:	20%~85% RH. (Non condensing)
● Storage Temperature	-20°C~+80°C
● Storage Humidity:	10%~90% RH. (Non condensing)
● Operating Altitude	10M Below Sea level and 3000M Above Sea level

DC INPUT CHARACTERISTICS:
● Input connector type	25A/300V UL Approved 3-Pin Terminal
● Input connector type	Make sure to plug the power source according to the label instruction
● Input Current	153A/305A @12V, 80A/151A @24V, 48A/80A @48V, 19A/30A @120V @Full Load High Line & Low Line
● Inrush Current	Less than 350A @12V, 250A @24V, 120A @48V, 60A @120V @Cold Start @25°C
DC OUTPUT CHARACTERISTICS:

Output Voltage	Regulation status			Output Current table						Ripple & Noise
	Load	Line	Cross	2200W		2400W		2500W
	Load	Line	Cross	Min.	Max.	Min.	Max.	Min.	Max.
5V	±5%	±1%	±5%	0A	440A	0A	480A	0A	500A	50mV
12V				0A	183,33A	0A	200A	0A	208,33A	120mV
24V				0A	91,66A	0A	100A	0A	104,16A	240mV
48V				0A	45,83A	0A	50A	0A	52,08A	480mV
120V				0A	18,33A	0A	20A	0A	20,83A	1200mV

OVERALL PERFORMANCE:
● Efficiency	70% typical @ 12V, 80-85% @ 24V, 48V, 90% @ 120V DC Full Load
● Short Circuit Protection (SCP)	All output equipped with SCP (shutdows and latch off)
● Over Power Protection (OPP)	Peak power protected to 130%±10% of continuous rated power
	(shutdown and latch off)
● Over Voltage Protection (OVP)

RELIABILITY:
● MTBF (Mean Time Between Failure):	>100 000 hours @max. Load, 25°C ambient
● Safety Standards	Meet IEC60950-1, EN60950-1
● Safety Approved
● EMI Compatibility (EMC) Standard	EN55032:2015/AC:2016, CISPR32:2015, EN6100-3-2:2014,
	EN6100-3-3:2013, EN55024:2010 +A1:2015

ISOLATION:
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand:	12V, 24V: INPUT to OUTPUT & INPUT to frame GND: 1.0kV DC for 60sec
● Dielectric Withstand:	48V: INPUT to OUTPUT & INPUT to frame GND: 2.0kV DC for 60 seconds
● Dielectric Withstand:	120V: INPUT to OUTPUT & INPUT to frame GND: 2.5kV DC for 60 seconds
● Leakage Current:	<0.005μA @ 12V, 24V, 48V, 120V DC

Output Connector specific:
● Terminal Block

PCB specific:
● 4 layer
● Copper: 3 Oz each layer
● Thickness: 1.6mm
● Material: FR4
● PCB material origin: Taiwan

Power chassis Dimension:
● 638.5(L) x 170(W) x 100(H) mm / 25.137(L) x 6.69(W) x 3.937(H) Inches

Net Weight:
● 5.2 kg / 11.46 lbs

Gross Weight:
● 6.3 kg / 13.89 lbs

Packing Detail
● 2 pcs
● 12.7 kg / 27.99 lbs

Measurement of Carton
● -