1U Open Frame Isolated DC to DC Converter with dual output 170W

Series	Model No.	Output Watts	Input Voltage	Input Voltage range	Polarity reverse protection
12	STC-12150D	170W continuous	±12V DC	±9V ~ ±17V DC	Fuse Protected
24	STC-24150D	170W continuous	±24V DC	±18V ~ ±36V DC	Fuse Protected
48	STC-48150D	170W continuous	±48V DC	±37V ~ ±71V DC	Fuse Protected


ENVIRONMENTAL CONDITIONS:
● Cooling:	Nature convection with U bracket heatsink
● Operating Temperature:	0°C ~ +50°C Full Load
● Operating Humidity:	20%~85% RH. (Non condensing)
● Storage Temperature	-20°C~+80°C
● Storage Humidity:	10%~90% RH. (Non condensing)
● Operating Altitude	10M Below Sea level and 3000M Above Sea level

DC INPUT CHARACTERISTICS:
● Input connector type	25A/300V UL Approved 8-Pin Terminal
● Input Current	10A/22A(max) @Full Load High Line & Low Line
● Inrush Current	Less than 30A Cold start @25°C ambient


DC OUTPUT CHARACTERISTICS:

Output Voltage	Regulation			Output Current						Ripple & Noise
	Load	Line	Cross	170W		170W		170W
	Load	Line	Cross	Min.	Max.	Min.	Max.	Min.	Max.
+5V	±5%	±1%	±5%	0A	10A					50mV
+12V				0A	10A					120mV
24V						0A	4A
-24V						0A	3A
5V								0A	15A
24V								0A	3A
Total combined output, max.				150		150		150		Watts
Total continuous output power				170		170		170		Watts


OVERALL PERFORMANCE:
● Efficiency	75% typical @12V, 24V, 48V DC Full Load
● Short Circuit Protection (SCP)	All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP)	Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP)	+5V, +12V, +24V DC output voltage

RELIABILITY:
● MTBF (Mean Time Between Failure):	>100 000 hours @max. Load, 12V DC & 25°C ambient
● Safety Standards	Meet IEC 60950-1, EN 60950-1
● Safety Approved
● EMI Compatibility (EMC) Standard	EN 55032:2015/AC:2016, CISPR 32:2015, EN 6100-3-2:2014,
	EN 6100-3-3:2013, EN 55024:2010 +A1:2015

ISOLATION:
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand:	INPUT to OUTPUT: 1500V DC for 60 seconds
● Dielectric Withstand:	INPUT to FRAME GROUND: 1500V DC for 60 seconds
● Leakage Current:	<0.005μA @ 12V, 24V or 48V DC input voltage

Input & Output Connector specific:
● Connector type:	25A/300V UL Approved 8-Pin Terminal

Power chassis Dimension:
● 172(L) x 98(W) x 40(H) mm / 6.77(L) x 3.86(W) x 1.57(H) Inches

Net Weight:
● 1.0 kg / 2.204 Lbs

Gross Weight:
● 1.5 kg / 3.3 Lbs

Packing Detail
● 8 pcs

Measurement of Carton
● 0.0325 m3 / 1.15 Cuft