Open Frame 15W Isolated DC to DC Converter

Note: XXX (where X=0~9) shows output voltage


ENVIRONMENTAL CONDITIONS:
● Cooling:	Natural convection
● Operating Temperature:	0°C ~ +65°C Full Load
● Operating Humidity:	20%~85% RH. (Non condensing)
● Storage Temperature	-20°C~+85°C
● Storage Humidity:	10%~90% RH. (Non condensing)
● Operating Altitude	10M Below Sea level and 3000M Above Sea level

DC INPUT CHARACTERISTICS:
● Input connector type	15A/300V UL Approved 2-Pin Terminal
● Input Current	1.5A(max.) @Full Load & Low Line
● Inrush Current	Less than 10A Cold start @25°C ambient


DC OUTPUT CHARACTERISTICS:

Output Voltage	Regulation			Output Current		Ripple & Noise
	Load	Line	Cross	15W
				Min	Max
5V ~ 25V DC	±5%	±1%	±5%	0A	open
Total combined contituous max. output power				15W		Watts


OVERALL PERFORMANCE:
● Efficiency	88% typical @120V DC and 220V DC Full Load
● Efficiency	80% typical @48V DC Full Load
● Efficiency	75% typical @24V DC Full Load
● Efficiency	70% typical @12V DC Full Load
● Short Circuit Protection (SCP)	All output equipped with SCP (shutdown and latch off)
● Over Power Protection (OPP)	Peak power protected to 130%±10% of continuous rated power (shutdown and latch off)
● Over Voltage Protection (OVP)	All output +130% of each output voltage

RELIABILITY:
● MTBF (Mean Time Between Failure):	>75 000 hours @max. Load & 25°C ambient
● Safety Standards	Meet IEC 60950-1, EN 60950-1
● Safety Approved
● EMI Compatibility (EMC) Standard	EN 55032:2015/AC:2016, CISPR 32:2015, EN 6100-3-2:2014,
	EN 6100-3-3:2013, EN 55024:2010 +A1:2015

ISOLATION:
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand:	INPUT to OUTPUT: 1500V DC for 60 seconds
● Dielectric Withstand:	INPUT to FRAME GROUND: 1500V DC for 60 seconds
● Leakage Current:	<0.005μA @ 250V DC

Input & Output Connector specific:
● Connector type:	Optional Terminal

Power chassis Dimension:
● 100(L) x 35(W) x 35(H) mm / 3.93(L) x 1.38(W) x 1.38(H) Inches

Optional plastic enclosure: