| |
| OVERALL PERFORMANCE: |
|
| ● Efficiency |
82% typical @48V DC Full Load |
| ● Hold up time |
The output voltage stays regulated for at least 16ms with 100% load after loss of DC input |
| ● Rise time |
The output voltage rise from 10% to 90% with full load shall be in 20ms maximum |
| ● Power Good Signal |
TTL Compatible signal, on delay 100~500ms, off delay 1ms min |
| ● Short Circuit Protection (SCP) |
All output equipped with SCP (shutdown and latch off) |
| ● Over Power Protection (OPP) |
Peak power protected to 130%±10% of continuous rated power (shutdown and latch off) |
| ● Over Voltage Protection (OVP) |
+3.3V@3.6V~4.3V, +5V@5.5V~6.5V, +12V@13.2V~15.6V |
| |
|
| RELIABILITY: |
|
| ● MTBF (Mean Time Between Failure): |
100 000 hours @max. Load, 48V DC & 25°C ambient |
| ● Safety Standards |
Meet IEC 60950-1, EN 60950-1 |
| ● Safety Approved |
|
| ● EMI Compatibility (EMC) Standard |
EN 55032:2015/AC:2016, CISPR 32:2015, EN 6100-3-2:2014, |
| |
EN 6100-3-3:2013, EN 55024:2010 +A1:2015 |
| |
|
ISOLATION:
|
|
| ● INPUT and OUTPUT are isolated by transformers and optical couplers |
| ● Dielectric Withstand: |
INPUT to OUTPUT: 1000V DC for 60 seconds |
| ● Dielectric Withstand: |
INPUT to FRAME GROUND: 1000V DC for 60 seconds |
| ● Leakage Current: |
<0.005μA @48V DC |
| |
|
| LED Indicator: |
|
| ● Power module 1: |
Green LED when Power On |
| ● Power module 2: |
Green LED when Power On |
| |
|
| Alarm function: |
|
| ● In the rear panel with power failure alarm signal to indicate when power failure wire |
| |
|
| Alarm reset switch: |
|
| ● To reset by switch |
| |
|
| Output Connector specific: |
|
| ● ATX 24 pin x 1: |
Molex 29-01-2240 or equivalent |
| ● HDD, DVD 4 pin x 2: |
Molex 8981-04P or equivalent |
| ● FDD 4 pin x 2: |
AMP 171822-4 or equivalent |
| ● Serial ATA x 8: |
Molex 675820000 or equivalent |
| ● CPU EPS 8 pin x 2: |
Molex 39-01-2080 or equivalent |
| ● PCIe (6+2) pin x 4 (Max 8 sets) |
| ● 12VHPWR (12V-2x6) x 1 600W Optional ATX 3.1 compliant |
| |
|
| Standard Output Cable Length: |
|
| ● 500 mm / 19.68 inches |
| |
|
| PCB specific: |
|
| ● 6 layer |
|
| ● Copper: 3 Oz each layer |
|
| ● Thickness: 1.6 mm |
|
| ● Material: FR4 |
|
| ● PCB material origin: Taiwan |
|
| |
|
| Power chassis Dimension: |
|
| ● 375(L) x 150(W) x 86(H) mm / 14.76(L) x 5.9(W) x 3.39(H) Inches |
| |
|
| Rackmount chassis solution: |
|
| ● 4U IPC Chassis 510mm Model no. GHI419ATX |
| |
|
| Screw hole: |
|
| ● Front Panel with 4 screw holes |
| ● Rear panel bracket with 2 screw holes |
| |
|
| Net Weight: |
|
| ● 8.2 kg / 18.08 lbs |
| |
|
| Gross Weight: |
|
| ● 10 kg / 22.02 lbs |
| |
|
| Packing Detail / 2pcs |
|
| ● 56 x 32 x 42 cm / 2.65 Cuft |
| ● N.W 16.4 kg / 36.16 lbs |
| ● G.W. 17.5 kg / 38.58 lbs |
| |
|
| Note: |
|
| ● Power Supply is not able to be used in stand alone application |
| ● Use Power Supply in Power Chassis Assembly only |