Series | Model No. |
Output Watts |
Input Voltage |
Input Voltage range |
Polarity reverse protection |
12 |
STC-121100 |
1100W continuous |
±12V DC |
±9V ~ ±18V DC |
Not Protected |
STC-121000 |
1000W continuous |
Not Protected |
ENVIRONMENTAL CONDITIONS: |
|
● Cooling: Forced Air-cooling, |
80x80x25 mm Fan x 2 pcs |
● Fan type: |
DC type, 2 x Ball Bearing, 6200 r.p.m., Optional Fan Control Card |
● Fan Noise Level:
|
40 dBA (DELTA Fan brand Official Data at 4000 r.p.m. 46.62 CFM)
|
● Fan Noise Level tested:
|
58 dBA @ Distance 1m (DELTA Fan brand at 4000 r.p.m. 46.62 CFM)
@Full Load |
● Fan brand:
|
DELTA, NMB, SUNON, SUNON IP68 (for H version).
Specifications are equivalent |
● Operating Temperature: | 0°C ~ +50°C (-30°C~+60°C, H version is optional) Full Load |
● Output Power:
|
100% @ 50°C, 70% @ 60°C , 50% @ 70°C |
● Operating Humidity: | 20%~85% RH. (Non condensing) (95% RH Optional) |
● Storage Temperature | -20°C~+80°C
|
● Storage Humidity:
|
10%~90% RH. (Non condensing) |
● Operating Altitude | 10M Below Sea level and 3000M Above Sea level |
|
|
DC INPUT CHARACTERISTICS: |
|
● Input connector type | 220A thickness 1.0mm / 1port for Positive terminal / |
|
1port for Negative Terminal |
● Input Current
|
72A/144A(1000W) & 82A/165A(1100W) @Full Load High Line & Low Line |
● Inrush Current | Less than 90A Cold start @25°C ambient
|
|
|
DC OUTPUT CHARACTERISTICS:
|
|
Output Voltage |
Regulation |
Output Current |
Ripple & Noise |
|||||
Load |
Line |
Cross |
1000W |
1100W |
||||
Min |
Max |
Min |
Max |
|||||
+5V |
±5% |
±1% |
±5% |
0A |
35A |
0A |
35A |
50mV |
+12V |
0A |
83A |
0A |
92A |
120mV |
|||
+3.3V |
0A |
22A |
0A |
22A |
50mV |
|||
-5V |
Optional
|
Optional
|
Optional
|
Optional
|
50mV |
|||
-12V |
±8% |
0A |
0.3A |
0A |
0.3A |
120mV |
||
+5VSB |
±5% |
0A |
4A |
0A |
4A |
50mV |
||
Maximum continuous combined load on +3.3 V & +5V DC output shall not exceed |
|
|
Watt |
|||||
Maximum continuous total DC output power shall not exceed |
1000 |
1100 |
OVERALL PERFORMANCE: | |
● Efficiency | 75% typical @12V DC Full Load |
● Power Good Signal
|
TTL Compatible signal, on delay 100~500ms, off delay 1ms min |
● Short Circuit Protection (SCP) | All output equipped with SCP (shutdown and latch off) |
● Over Power Protection (OPP) | Peak power protected to 130%±10% of continuous rated power |
|
(shutdown and latch off)
|
● Over Voltage Protection (OVP) | +3.3V@4.5V, +5V@6V, +12V@15.6V |
|
|
RELIABILITY: |
|
● MTBF (Mean Time Between Failure): | >90 000 hours @max. Load, 12V DC & 25°C ambient
|
● Safety Standards | Meet IEC60950-1, EN60950-1 |
● Safety Approved |
|
● EMI Compatibility (EMC) Standard | EN55032:2015/AC:2016, CISPR32:2015, EN6100-3-2:2014, |
|
EN6100-3-3:2013, EN55024:2010 +A1:2015 |
|
|
ISOLATION:
|
|
● INPUT and OUTPUT are isolated by transformers and optical couplers
|
|
● Dielectric Withstand: | INPUT to OUTPUT: 500V DC for 60 seconds |
● Dielectric Withstand: | INPUT to FRAME GROUND: 500V DC for 60 seconds |
● Leakage Current: | <0.005μA @ 12V DC |
|
|
Output Connector specific: |
|
● ATX 24 Pin x 1: | Molex 29-01-2240 or equivalent |
● +12V(P4) 4 pin x 1: | Molex 39-01-2040 or equivalent |
● HDD, DVD 4 pin x 2: | Molex 8981-04P or equivalent |
● FDD 4 pin x 2: | AMP171822-4 or equivalent |
● Serial ATA x 8 | Molex 675820000 or equivalent |
● CPU EPS 8 Pins x 1 | Molex 39-01-2080 or equivalent |
● PCIe x 4 |
|
|
|
Standard Output Cable Length:
● 610 mm / 24 inches
PCB specific:
● 4 layer
● Copper: 3 Oz each layer
● Thickness: 1.6mm
● Material: FR4
● PCB material origin: Taiwan
Power chassis Dimension:
● 270(L) x 150(W) x 86(H) mm / 10.63(L) x 5.9(W) x 3.39(H) Inches
Net Weight:
● 4.7 kg / 10.36 lbs
Gross Weight:
● 5.3 kg / 11.68 lbs
Packing Detail
● 2 pcs / Carton
● N.W. 10.8 kg / 23.8 lbs
● G.W. 11.8 kg / 26.0 lbs
Measurement of Carton
● 0.045 m3 / 1.58 Cu.Ft.
Input Connector Terminal Pictures:
Optional connection wire
● Single wire, 2AWG, UL1015, standard length 3m (optional length is available)
STC-DTD-270-enclosure - xs.pdf
DOWNLOAD_specification_4UATX_STC-121100_270mm.pdf