Series |
Model No. |
Output Watts |
Input Voltage |
Input Voltage range |
Polarity reverse protection |
220 |
STC-2201100 |
1100W continuous |
±220V DC |
±190V ~ ±245V DC |
Not protected |
ENVIRONMENTAL CONDITIONS: |
|
● Cooling: Forced Air-cooling, |
80x80x25 mm Fan x 1 pc |
● Fan type: |
DC type, 2 x Ball Bearing, 6200 r.p.m., Optional Fan Control Card |
● Fan Noise Level:
|
40 dBA (DELTA Fan brand Official Data at 4000 r.p.m. 46.62 CFM)
|
● Fan Noise Level tested:
|
58 dBA @ Distance 1m (DELTA Fan brand at 4000 r.p.m. 46.62 CFM)
@Full Load |
● Fan brand:
|
DELTA, NMB, SUNON, SUNON IP68 (for H version).
Specifications are equivalent |
● Operating Temperature: | 0°C ~ +50°C (-30°C~+60°C, H version is optional) Full Load |
● Output Power:
|
100% @ 50°C, 70% @ 60°C , 50% @ 70°C |
● Operating Humidity: | 20%~85% RH. (Non condensing) (95% RH Optional) |
● Storage Temperature | -20°C~+80°C
|
● Storage Humidity:
|
10%~90% RH. (Non condensing) |
● Operating Altitude | 10M Below Sea level and 3000M Above Sea level |
|
|
DC INPUT CHARACTERISTICS: |
|
● Input connector type | 100A/300V UL Approved Gold Plated Brass 1.2t/3-pin Terminal
|
● Input Current
|
5A/6.6A(1100W) @Full Load High Line & Low Line |
● Inrush Current | Less than 20A Cold start @25°C ambient
|
|
|
DC OUTPUT CHARACTERISTICS:
|
|
Output Voltage |
Regulation |
Output Current |
Ripple & Noise |
|||
Load |
Line |
Cross |
1100W |
|||
Min |
Max |
|||||
+5V |
±5% |
±1% |
±5% |
0A |
23A |
50mV |
+12V |
0A |
80A |
120mV |
|||
+3.3V |
0A |
22A |
50mV |
|||
-12V |
±8% |
0A |
0.3A |
120mV |
||
-5V(optional) |
|
Optional | Optional | 50mV | ||
+5VSB |
±5% |
0A |
3.5A |
50mV |
||
Maximum continuous combined load on +3.3 V & +5V DC output shall not exceed |
30 |
Amps |
OVERALL PERFORMANCE: | |
● Efficiency | 85% typical @220V DC Full Load |
● Power Good Signal | TTL Compatible signal, on delay 100~500ms, off delay 1ms min |
● Short Circuit Protection (SCP) | All output equipped with SCP (shutdown and latch off) |
● Over Power Protection (OPP) | Peak power protected to 130%±10% of continuous rated power |
|
(shutdown and latch off)
|
● Over Voltage Protection (OVP) | +3.3V@4.5V, +5V@6V, +12V@15.6V |
|
|
RELIABILITY: |
|
● MTBF (Mean Time Between Failure): | >90 000 hours @max. Load, 220V DC & 25°C ambient
|
● Safety Standards | Meet IEC60950-1, EN60950-1 |
● Safety Approved |
|
● EMI Compatibility (EMC) Standard | EN55032:2015/AC:2016, CISPR32:2015, EN6100-3-2:2014, |
|
EN6100-3-3:2013, EN55024:2010 +A1:2015 |
|
|
ISOLATION:
|
|
● INPUT and OUTPUT are isolated by transformers and optical couplers
|
|
● Dielectric Withstand: | INPUT to OUTPUT: 3000V AC for 60 seconds |
● Dielectric Withstand: | INPUT to FRAME GROUND: 3000V AC for 60 seconds |
● For Production purpose: 100% Tested | INPUT to FRAME GROUND: 3000V AC for 1 seconds |
● Leakage Current: | <0.005μA @ 220V DC |
|
|
Output Connector specific: |
|
● ATX 24 Pin x 1:
|
Molex 29-01-2240 or equivalent
|
● HDD, DVD 4 pin x 2: | Molex 8981-04P or equivalent |
● FDD 4 pin x 1: | AMP171822-4 or equivalent |
● Serial ATA x 8: | Molex 675820000 or equivalent |
● CPU EPS 8 Pins x 2: | Molex 39-01-2080 or equivalent |
● PCIe 6 + 2 pin x 4 (Max Optional 8 sets)
|
|
|
|
Standard Output Cable Length:
● 610 mm / 24 inches
PCB specific:
● 6 layer
● Copper: 3 Oz each layer
● Thickness: 1.6mm
● Material: FR4
● PCB material origin: Taiwan
Power chassis Dimension:
● 200(L) x 150(W) x 86(H) mm / 7.87(L) x 5.9(W) x 3.39(H) Inches
Net Weight:
● 3.8 kg / 8.38 lbs
Gross Weight:
● 4 kg / 8.818 lbs
Packing Detail
● 4 pcs
● GW 15.6 kg
Measurement of Carton
● 36 x 35 x 51 cm
● 0.066 m3 / 2.33 Cuft
DOWNLOAD_specification_4UATX_STC-2201100_200mm.pdf
DOWNLOAD_enclosure_wireharness_stc-dtd-200-20220803s.pdf