1U ±12V DC Industrial PC ATX Power Supply 100mm width


1U ±12V DC Industrial PC ATX Power Supply 100mm width

Series Model No. Output Watts Input Voltage Input Voltage range Polarity reverse protection
12 STC-12600I 600 W continuous ±12V DC ±9V ~ ±18V DC Fuse protected
STC-12400I 400 W continuous
STC-12200I 200 W continuous
 
   
ENVIRONMENTAL CONDITIONS:  
● Cooling: Forced Air-cooling, 40x40x28 mm Fan x 2 (With Two Ball Bearing)
● Fan Noise Level: Load 50% 65dBA
Load 70% 69dBA
Load 100% 73.5dBA
Tested Distance is 1 meter
● Built-in fan control function / STC-12200I, STC-12400I
● Fan brand: DELTA, NMB, SUNON. Specifications are equivalent
● Operating Temperature: 0°C ~ +50°C Full Load
  -20°C ~ +60°C Full Load * optional H version (Black color chassis)
● Operating Humidity: 20%~85% RH Non condensing
  90% RH Non condensing * optional H version (Black color chassis)
● Storage Temperature -20°C~+80°C (-40°C~+80°C for STC-12600IH)
● Storage Humidity: 10%~90% RH. (Non condensing)
● Operating Altitude 10M Below Sea level and 3000M Above Sea level
   
DC INPUT CHARACTERISTICS:  
● Input connector type 40A/300V Single table type Terminal x 2 / STC-12200I

160A/300V Single table type Terminal x 2
● Input Current  45A/90A(600W) 30A/60A(400W) 15A/30A(200W)
  @Full Load High Line & Low Line
● Inrush Current Less than 90A Cold start @25°C ambient
   
DC OUTPUT CHARACTERISTICS:  
Output Voltage Regulation Output Current Ripple & Noise
Load Line Cross 600W 400W 200W
Min. Max. Min. Max. Min. Max.
+5V ±5% ±1% ±5% 0.5A 25A 0A 25A 0A 30A 50mV
+12V 1A 48A 1A 31A 0A 15A 120mV
+3.3V 0.5A 22A 0.5A 22A 0A 15A 50mV
-12V ±8% 0A 0.3A 0A 0.3A 0A 1A 120mV
+5VSB ±5% 0.1A 2.5A 0.1A 2.5A 0A 3A 50mV
Maximum continuous combined load on +3.3V & +5V DC output shall not exceed 166 166   Watts
Maximum continuous combined load on +3.3V & +5V &12V DC output shall not exceed 570 370 170
Maximum continuous total DC output power shall not exceed 600 400 200
MOQ requirement       30 pcs
 
OVERALL PERFORMANCE:   
● Efficiency 65% typical @12V DC Full Load
● Hold up time The output voltage stays regulated for at least 16ms with 100% load after loss of DC input
● Rise time The output voltage rise from 10% to 90% with full load shall be in 20ms maximum
● Power Good Signal   TTL Compatible signal, on delay 100~500ms, off delay 1ms min
● Short Circuit Protection (SCP) All output equipped with SCP (shutdows and latch off)
● Over Power Protection (OPP) Peak power protected to 130%±10% of continuous rated power
  (shutdown and latch off)
● Over Voltage Protection (OVP) +3.3V@4.5V, +5V@6V, +12V@15.6V
   
RELIABILITY:  
● MTBF (Mean Time Between Failure): >75 000 hours @max. Load, 12V DC & 25°C ambient
● Safety Standards Meet IEC 60950-1, EN 60950-1 / STC-12200I, STC-12400I 
● Safety Standards Meet IEC 62368-1, EN 62368-1 / STC-12600I
● Safety Approved  
● EMI Compatibility (EMC) Standard EN 55032:2015/AC:2016, CISPR 32:2015, EN 6100-3-2:2014,
  EN 6100-3-3:2013, EN 55024:2010 +A1:2015
ISOLATION:
 
● INPUT and OUTPUT are isolated by transformers and optical couplers
● Dielectric Withstand: INPUT to OUTPUT: 500V DC for 60 seconds
● Dielectric Withstand: INPUT to FRAME GROUND: 500V DC for 60 seconds
● Leakage Current: <0.005μA @ 12V DC
   
Output Connector specific:  
● ATX 24 pin x 1: Molex 29-01-2240 or equivalent
● HDD, DVD 4 pin x 2: Molex 8981-04P or equivalent
● FDD 4 pin x 1: AMP 171822-4 or equivalent
● Serial ATA x 4: Molex 675820000 or equivalent
● CPU EPS 8 pin (4+4) x 2: Molex 39-01-2080 or equivalent
● PCIe 12V 6+2 pin x 1  
● PCIe 12V 6+2 pin x 2 / STC-12600I
   
   
Standard Output Cable Length:  
● 550 mm ±50 mm / 21.6 inches
   
   
PCB specific:  
● 2 layer / STC-12200I, STC-12400I
● 4 layer / STC-12600I
● Copper 3 Oz each layer
● Thickness: 1.6 mm
● Material: FR4
● PCB material origin: Taiwan
   
Power chassis Dimension:  
● 220(L) x 100(W) x 40.5(H) mm / 8.66(L) x 3.94(W) x 1.59(H) inches / STC-12200I
● 240(L) x 100(W) x 40.5(H) mm / 9.45(L) x 3.94(W) x 1.59(H) inches / STC-12400I
● 340(L) x 100(W) x 40.5(H) mm / 13.38(L) x 3.94(W) x 1.59(H) inches / STC-12600I
   
   
Net Weight:  
● 2.7 kg / 5.95 lbs / STC-12600I
● 1.9 kg / 4.41 lbs / STC-12400I
   
Gross Weight:  
● 2 kg / 4.41 lbs / STC-12400I
   
   
Packing Detail:  
● N.W.: 15.2 kg / 33.5 Lbs G.W.: 17 kg / 37.47 / STC-12400I
   
   
Measurement of Carton  
● 0.049 m3 / 1.73 Cuft / STC-12400I

DOWNLOAD_specification_1UATX_STC_12600I
DOWNLOAD optional Input connector specification_62GB-12E14-04PN-s.pdf
DOWNLOAD_Enclosure_Wire harness_STC-DTD-1U_W100-20241224.pdf